The module adds support for data visualization, analysis and storage of Optris Thermovison cameras (models XI400, PI400, PI640). Please note that only one camera at a time can be used with Dewesoft.
Open Market/ 3 Weeks
Dewesoft plugin that adds PCM Encoder functionality.
Open Market/ 3 Weeks
The module allows you to decode the SENT protocol (SAE J2716 ) data and store it as Dewesoft channels. Fast and slow channels are supported. Counter inputs are required to read the signal.
Open Market/ 3 Weeks
20mA input with TEDS for D9m - - 50 Ohm 0.05%. - - Screw terminals inside connector
Open Market/ 16 Weeks
The OPC UA Client plugin enables DEWESoft to acquire data from OPC UA servers.
Open Market/ 3 Weeks
The OPC UA Server plugin enables DEWESoft to publish data using the OPC UA protocol. It enables control and measurement by using DEWESoft OPC UA Client plugin or any other 3rd party OPC UA clients.
Open Market/ 3 Weeks
Hardware driver for configuration and data acquisition of RoaDyn-2000 over LAN interface. - Requires DEWESOFT-LT, -SE, -PROF, -DSA or -ENTERPRISE software (version 6.5.1 or higher) - and a synchronization cable CBL-ROADYN-x-x
Open Market/ 3 Weeks
Plugin supports communication with Siemens PLC devices via S7 protocol over Ethernet.
Open Market/ 3 Weeks
A generic plugin for Serial Communication. It can receive serial data and extract text or numeric data from the byte stream. You can also send data to the serial device (e.g. on start of storing or every X seconds, to ).
Open Market/ 3 Weeks
Daisy Chain cable for ECAT - - ECAT (L1T8f) to ECAT (L1T8m) - - Operational temp: -40 to 85 C - - Enviro Spec: IP67 - - Length: 5m - **Does NOT provide power, but daisy chains it**
Open Market/ 16 Weeks
LVDT Input adaptor - - Generates 4 or 10 kHz Excitation - - Output: 1 V = 1000mV/V - - Phase adjustment with potentiometer.
Open Market/ 16 Weeks
The Online Data Export (ODE) plugin can export DEWESoft measurement data of numerical channels during storing directly to a database (currently MySQL and Microsoft SQL Server are supported) or to .csv files
Open Market/ 3 Weeks
The OxTS module is used for all Oxford RT-series GNSS/INS devices to get synchronized data over Ethernet into Dewesoft. OxTS can be a clock master for NET systems and also clock master for synchronization of other Dewesoft hardware
Open Market/ 3 Weeks
The ADMA Ethernet plugin can be used with any Genesys ADMA device which has an Ethernet data output (hardware v3 and newer).
Open Market/ 3 Weeks
Options for 1 microphone or 4 microphones. The output calculations will give 1. For each corner (FL, FR, RL, RR) up to X squeals, defined in number of brake squeals
Open Market/ 3 Weeks
DEWESoft plugin for Chapter10 support
Open Market/ 3 Weeks
Support for Astromed printers
Open Market/ 3 Weeks
Support for digital PCM (pulse code modulated) Call for supported cards or use DEWESoft-PLUGIN-CHAPTER-10.
Open Market/ 3 Weeks
Polygon plugin is a tool to visualize fixed objects (like tracks, cones, etc.) and moving vehicles.
Open Market/ 3 Weeks
Psophometer is used for testing telecommunication equipment. It shows us audible effects of disturbing voltages of various frequencies.
Open Market/ 3 Weeks
A plugin for measurement of reverberation time (RT60 -time required for sound to decay 60 decibels from its initial level) and absorption coefficient (alpha).
Open Market/ 3 Weeks
Sound Intensity Plugin for DEWESoft X
Open Market/ 3 Weeks
A tool for structural analysis of large structures. Using the COLA output from a shaker system, Dewesoft's sine processing module tracks the frequency of a sweep and performs analysis at the exact frequency of excitation.
Open Market/ 3 Weeks
Shock response spectrum is a graphical representation of transient acceleration input (such as shock) in terms of how SDOF system response to that input.
Open Market/ 3 Weeks
The DEWESoft TCP/IP Binary Client plugin can receive data from external applications (e.g. LabView, to ) via TCP/IP and add this data to Dewesoft channels.
Open Market/ 3 Weeks
Support for VELODYNE Lidar sensor connected over Ethernet. Multiple devices are supported and can be synchronized using Soft-sync or PPS.
Open Market/ 3 Weeks
Allows you to scan linear barcodes, QR codes and Data matrices and store their content into the data header. Both the handheld scanner and camera modes are supported.
Open Market/ 3 Weeks
Ethernet sniffer with simple filtering capabilities and data decoding in order to extract data channels from Ethernet streams.
Open Market/ 3 Weeks
Adds support for Kistler KiRoad Performance measurement device. KiRoad Performance is a compact on-board electronics unit that enables users to configure Kistler RoaDyn wheel force transducers quickly and reliably.
Open Market/ 3 Weeks
This plugin supports one NMEA compatible Weather Station Device (e.g. Vaisala WXT520) via RS232 interface. Currently MWV and XDR messages are supported. The device must be configured to send the data automatically.
Open Market/ 3 Weeks
The ADMA device is a high speed/high performance gyro platform used in automotive industry to measure absolute position, velocities, accelerations, angles (yaw, pitch, roll) and angular velocities.
Open Market/ 3 Weeks
Brake test is automated testing sequence, which allows you to acquire and process data for vehicle dynamic testing applications (like MFDD, stopping time and distance).
Open Market/ 3 Weeks
Interface from DEWESoft-CA to a testbed via RS-232 or TCP/IP, provides control- and data transfer interface, supported protocols: IndiMaser 670 compatible RS-232, Puma Open, D2T, Tornado
Open Market/ 3 Weeks
Sound power is characteristics of the sound source and is one of the practical ways of comparing various sound sources. Sound power plugin calculates Spl and Lw - overall and spectrall (octave) values.
Open Market/ 3 Weeks
The sound quality plugin supports monaural and binaural calculations of loudness (Zwicker and Moore-Glassberg methods), sharpness, NR, NC, Articulation Index and the speech Intelligibility calculation.
Open Market/ 3 Weeks
Plugin enables data acquisition from Electronic Control Units (ECUs) supporting CCP or XCP (over CAN or Ethernet) protocol. No additional HW is needed except CAN/Ethernet port.
Open Market/ 3 Weeks
Plugin for FlexRay system bus, with FIBEX library import option, mainly designed for use in automotive industry.
Open Market/ 3 Weeks
This plugin supports the Microstrain MIP protocol. It was developed with a 3DM-GX4-45 sensor.
Open Market/ 3 Weeks
Filehandling of Dewesoft Data Files, copy to Host, copy to FTP (active, passive password supported), copy to LAN when connection is available, shut down after transfer, remove file after transfer
Open Market/ 3 Weeks
The Excel Writer plugin can write numeric and textual DEWESoft data during measurement to Excel. You can select a trigger channel and define which channels should be written to Excel.
Open Market/ 3 Weeks
Supports FLIR Thermovison cameras type A300, A310, A315, A320, A325, A615, SC305, SC325, SC645, SC655. Data visualization, analysis, storage
Open Market/ 3 Weeks
Support for GANTNER modules - Requires DEWESOFT-PROF
Open Market/ 3 Weeks
The LIN bus plugin allows DEWESoft users to simply connect and listen to communication on multiple LIN networks. Using Vector hardware, we mimic listen-only slaves that listen to all data transmission on the bus.
Open Market/ 3 Weeks
DEWESoft plugin to allow users to use the Missed Distance Calculator
Open Market/ 3 Weeks
A module for sending notifications (email or HTTP post) based on multiple trigger conditions and with custom notification messages.
Open Market/ 3 Weeks
EtherCAT GPS Sync Junction module - Synchronization between EtherCAT devices and standard USB devices via IRIG-B-DC or GPS.
Open Market/ 16 Weeks
DEWESoft plugin for iNET data support
Open Market/ 3 Weeks
The LORD MicroStrain plugin enables DEWESoft to collect data from LORD MicroStrain wireless gateways, which acquire the data from wireless sensor nodes.
Open Market/ 3 Weeks
DS-CAN2 USB CAN BUS interface unit - 2 channels of CAN
Open Market/ 16 Weeks
Power injector that acts as an additional power source in the chain of EtherCAT instruments, connecting the EtherCAT chain with power supply.
Open Market/ 16 Weeks
